Delta Lake connector

The Delta Lake connector allows querying data stored in the Delta Lake format, including Databricks Delta Lake. The connector can natively read the Delta Lake transaction log and thus detect when external systems change data.

Requirements

To connect to Databricks Delta Lake, you need:

• Tables written by Databricks Runtime 7.3 LTS, 9.1 LTS, 10.4 LTS, 11.3 LTS, 12.2 LTS and 13.3 LTS are supported.

• Deployments using AWS, HDFS, Azure Storage, and Google Cloud Storage (GCS) are fully supported.

• Network access from the coordinator and workers to the Delta Lake storage.

• Access to the Hive metastore service (HMS) of Delta Lake or a separate HMS, or a Glue metastore.

• Network access to the HMS from the coordinator and workers. Port 9083 is the default port for the Thrift protocol used by the HMS.

• Data files stored in the Parquet file format. These can be configured using file format configuration properties per catalog.

General configuration

To configure the Delta Lake connector, create a catalog properties file etc/catalog/example.properties that references the delta_lake connector and defines a metastore. You must configure a metastore for table metadata. If you are using a Hive metastore, hive.metastore.uri must be configured:

connector.name=delta_lake
hive.metastore.uri=thrift://example.net:9083

If you are using AWS Glue as your metastore, you must instead set hive.metastore to glue:

connector.name=delta_lake
hive.metastore=glue

Each metastore type has specific configuration properties along with general metastore configuration properties.

The connector recognizes Delta Lake tables created in the metastore by the Databricks runtime. If non-Delta Lake tables are present in the metastore as well, they are not visible to the connector.

To configure access to S3 and S3-compatible storage, Azure storage, and others, consult the appropriate section of the Hive documentation:

• Amazon S3

• Azure storage documentation

• GCS

Delta Lake general configuration properties

The following configuration properties are all using reasonable, tested default values. Typical usage does not require you to configure them.

Delta Lake configuration properties

Property name	Description	Default
delta.metadata.cache-ttl	Frequency of checks for metadata updates equivalent to transactions to update the metadata cache specified in duration.	5m
delta.metadata.cache-size	The maximum number of Delta table metadata entries to cache.	1000
delta.metadata.live-files.cache-size	Amount of memory allocated for caching information about files. Must be specified in data size values such as 64MB. Default is calculated to 10% of the maximum memory allocated to the JVM.
delta.metadata.live-files.cache-ttl	Caching duration for active files that correspond to the Delta Lake tables.	30m
delta.compression-codec	The compression codec to be used when writing new data files. Possible values are: NONE SNAPPY ZSTD GZIP The equivalent catalog session property is compression_codec.	SNAPPY
delta.max-partitions-per-writer	Maximum number of partitions per writer.	100
delta.hide-non-delta-lake-tables	Hide information about tables that are not managed by Delta Lake. Hiding only applies to tables with the metadata managed in a Glue catalog, and does not apply to usage with a Hive metastore service.	false
delta.enable-non-concurrent-writes	Enable write support for all supported file systems. Specifically, take note of the warning about concurrency and checkpoints.	false
delta.default-checkpoint-writing-interval	Default integer count to write transaction log checkpoint entries. If the value is set to N, then checkpoints are written after every Nth statement performing table writes. The value can be overridden for a specific table with the checkpoint_interval table property.	10
delta.hive-catalog-name	Name of the catalog to which SELECT queries are redirected when a Hive table is detected.
delta.checkpoint-row-statistics-writing.enabled	Enable writing row statistics to checkpoint files.	true
delta.checkpoint-filtering.enabled	Enable pruning of data file entries as well as data file statistics columns which are irrelevant for the query when reading Delta Lake checkpoint files. The equivalent catalog session property is checkpoint_filtering_enabled.	true
delta.dynamic-filtering.wait-timeout	Duration to wait for completion of dynamic filtering during split generation. The equivalent catalog session property is dynamic_filtering_wait_timeout.
delta.table-statistics-enabled	Enables Table statistics for performance improvements. The equivalent catalog session property is statistics_enabled.	true
delta.extended-statistics.enabled	Enable statistics collection with ANALYZE and use of extended statistics. The equivalent catalog session property is extended_statistics_enabled.	true
delta.extended-statistics.collect-on-write	Enable collection of extended statistics for write operations. The equivalent catalog session property is extended_statistics_collect_on_write.	true
delta.per-transaction-metastore-cache-maximum-size	Maximum number of metastore data objects per transaction in the Hive metastore cache.	1000
delta.delete-schema-locations-fallback	Whether schema locations are deleted when Trino can’t determine whether they contain external files.	false
delta.parquet.time-zone	Time zone for Parquet read and write.	JVM default
delta.target-max-file-size	Target maximum size of written files; the actual size could be larger. The equivalent catalog session property is target_max_file_size.	1GB
delta.unique-table-location	Use randomized, unique table locations.	true
delta.register-table-procedure.enabled	Enable to allow users to call the register_table procedure.	false
delta.vacuum.min-retention	Minimum retention threshold for the files taken into account for removal by the VACUUM procedure. The equivalent catalog session property is vacuum_min_retention.	7 DAYS

Catalog session properties

The following table describes catalog session properties supported by the Delta Lake connector:

Catalog session properties

Property name	Description	Default
parquet_max_read_block_size	The maximum block size used when reading Parquet files.	16MB
parquet_writer_block_size	The maximum block size created by the Parquet writer.	128MB
parquet_writer_page_size	The maximum page size created by the Parquet writer.	1MB
parquet_writer_page_value_count	The maximum value count of pages created by the Parquet writer.	60000
parquet_writer_batch_size	Maximum number of rows processed by the Parquet writer in a batch.	10000
projection_pushdown_enabled	Read only projected fields from row columns while performing SELECT queries.	true

Type mapping

Because Trino and Delta Lake each support types that the other does not, this connector modifies some types when reading or writing data. Data types might not map the same way in both directions between Trino and the data source. Refer to the following sections for type mapping in each direction.

See the Delta Transaction Log specification for more information about supported data types in the Delta Lake table format specification.

Delta Lake to Trino type mapping

The connector maps Delta Lake types to the corresponding Trino types following this table:

Delta Lake to Trino type mapping

Delta Lake type	Trino type
BOOLEAN	BOOLEAN
INTEGER	INTEGER
BYTE	TINYINT
SHORT	SMALLINT
LONG	BIGINT
FLOAT	REAL
DOUBLE	DOUBLE
DECIMAL(p,s)	DECIMAL(p,s)
STRING	VARCHAR
BINARY	VARBINARY
DATE	DATE
TIMESTAMPNTZ (TIMESTAMP_NTZ)	TIMESTAMP(6)
TIMESTAMP	TIMESTAMP(3) WITH TIME ZONE
ARRAY	ARRAY
MAP	MAP
STRUCT(...)	ROW(...)

No other types are supported.

Trino to Delta Lake type mapping

The connector maps Trino types to the corresponding Delta Lake types following this table:

Trino to Delta Lake type mapping

Trino type	Delta Lake type
BOOLEAN	BOOLEAN
INTEGER	INTEGER
TINYINT	BYTE
SMALLINT	SHORT
BIGINT	LONG
REAL	FLOAT
DOUBLE	DOUBLE
DECIMAL(p,s)	DECIMAL(p,s)
VARCHAR	STRING
VARBINARY	BINARY
DATE	DATE
TIMESTAMP	TIMESTAMPNTZ (TIMESTAMP_NTZ)
TIMESTAMP(3) WITH TIME ZONE	TIMESTAMP
ARRAY	ARRAY
MAP	MAP
ROW(...)	STRUCT(...)

No other types are supported.

Delta Lake table features

The connector supports the following Delta Lake table features:

Table features

Feature	Description
Append-only tables	Writers only
Column invariants	Writers only
CHECK constraints	Writers only
Change data feed	Writers only
Column mapping	Readers and writers
Deletion vectors	Readers only
Timestamp without time zone	Readers and writers

No other features are supported.

Security

The Delta Lake connector allows you to choose one of several means of providing authorization at the catalog level. You can select a different type of authorization check in different Delta Lake catalog files.

Authorization checks

Enable authorization checks for the connector by setting the delta.security property in the catalog properties file. This property must be one of the security values in the following table:

Delta Lake security values

Property value	Description
ALLOW_ALL (default value)	No authorization checks are enforced.
SYSTEM	The connector relies on system-level access control.
READ_ONLY	Operations that read data or metadata, such as SELECT are permitted. No operations that write data or metadata, such as CREATE TABLE, INSERT, or DELETE are allowed.
FILE	Authorization checks are enforced using a catalog-level access control configuration file whose path is specified in the security.config-file catalog configuration property. See Catalog-level access control files for information on the authorization configuration file. :::

SQL support

The connector provides read and write access to data and metadata in Delta Lake. In addition to the globally available and read operation statements, the connector supports the following features:

• Write operations:

  • Data management, see details for Delta Lake data management

  • Schema and table management, see details for Delta Lake schema and table management

  • View management

Procedures

Use the CALL statement to perform data manipulation or administrative tasks. Procedures are available in the system schema of each catalog. The following code snippet displays how to call the example_procedure in the examplecatalog catalog:

CALL examplecatalog.system.example_procedure()

Register table

The connector can register table into the metastore with existing transaction logs and data files.

The system.register_table procedure allows the caller to register an existing Delta Lake table in the metastore, using its existing transaction logs and data files:

CALL example.system.register_table(schema_name => 'testdb', table_name => 'customer_orders', table_location => 's3://my-bucket/a/path')

To prevent unauthorized users from accessing data, this procedure is disabled by default. The procedure is enabled only when delta.register-table-procedure.enabled is set to true.

Unregister table

The connector can unregister existing Delta Lake tables from the metastore.

The procedure system.unregister_table allows the caller to unregister an existing Delta Lake table from the metastores without deleting the data:

CALL example.system.unregister_table(schema_name => 'testdb', table_name => 'customer_orders')

Flush metadata cache

• system.flush_metadata_cache()

  Flushes all metadata caches.

• system.flush_metadata_cache(schema_name => ..., table_name => ...)

  Flushes metadata cache entries of a specific table. Procedure requires passing named parameters.

VACUUM

The VACUUM procedure removes all old files that are not in the transaction log, as well as files that are not needed to read table snapshots newer than the current time minus the retention period defined by the retention period parameter.

Users with INSERT and DELETE permissions on a table can run VACUUM as follows:

CALL example.system.vacuum('exampleschemaname', 'exampletablename', '7d');

All parameters are required and must be presented in the following order:

• Schema name

• Table name

• Retention period

The delta.vacuum.min-retention configuration property provides a safety measure to ensure that files are retained as expected. The minimum value for this property is 0s. There is a minimum retention session property as well, vacuum_min_retention.

Data management

You can use the connector to INSERT, DELETE, UPDATE, and MERGE data in Delta Lake tables.

Write operations are supported for tables stored on the following systems:

• Azure ADLS Gen2, Google Cloud Storage

  Writes to the Azure ADLS Gen2 and Google Cloud Storage are enabled by default. Trino detects write collisions on these storage systems when writing from multiple Trino clusters, or from other query engines.

• S3 and S3-compatible storage

  Writes to Amazon S3 and S3-compatible storage must be enabled with the delta.enable-non-concurrent-writes property. Writes to S3 can safely be made from multiple Trino clusters; however, write collisions are not detected when writing concurrently from other Delta Lake engines. You must make sure that no concurrent data modifications are run to avoid data corruption.

Schema and table management

The Schema and table management functionality includes support for:

• CREATE TABLE

• CREATE TABLE AS

• DROP TABLE

• ALTER TABLE, see details for Delta Lake ALTER TABLE

• CREATE SCHEMA

• DROP SCHEMA

• ALTER SCHEMA

• COMMENT

The connector supports creating schemas. You can create a schema with or without a specified location.

You can create a schema with the CREATE SCHEMA statement and the location schema property. Tables in this schema are located in a subdirectory under the schema location. Data files for tables in this schema using the default location are cleaned up if the table is dropped:

CREATE SCHEMA example.example_schema
WITH (location = 's3://my-bucket/a/path');

Optionally, the location can be omitted. Tables in this schema must have a location included when you create them. The data files for these tables are not removed if the table is dropped:

CREATE SCHEMA example.example_schema;

When Delta Lake tables exist in storage but not in the metastore, Trino can be used to register the tables:

CALL example.system.register_table(schema_name => 'testdb', table_name => 'example_table', table_location => 's3://my-bucket/a/path')

The table schema is read from the transaction log instead. If the schema is changed by an external system, Trino automatically uses the new schema.

Warning

Using CREATE TABLE with an existing table content is disallowed, use the system.register_table procedure instead.

If the specified location does not already contain a Delta table, the connector automatically writes the initial transaction log entries and registers the table in the metastore. As a result, any Databricks engine can write to the table:

CREATE TABLE example.default.new_table (id BIGINT, address VARCHAR);

The Delta Lake connector also supports creating tables using the CREATE TABLE AS syntax.

The connector supports the following ALTER TABLE statements.

ALTER TABLE EXECUTE

The connector supports the following commands for use with ALTER TABLE EXECUTE.

optimize

The optimize command is used for rewriting the content of the specified table so that it is merged into fewer but larger files. If the table is partitioned, the data compaction acts separately on each partition selected for optimization. This operation improves read performance.

All files with a size below the optional file_size_threshold parameter (default value for the threshold is 100MB) are merged:

ALTER TABLE test_table EXECUTE optimize

The following statement merges files in a table that are under 128 megabytes in size:

ALTER TABLE test_table EXECUTE optimize(file_size_threshold => '128MB')

You can use a WHERE clause with the columns used to partition the table to filter which partitions are optimized:

ALTER TABLE test_partitioned_table EXECUTE optimize
WHERE partition_key = 1

You can use a more complex WHERE clause to narrow down the scope of the optimize procedure. The following example casts the timestamp values to dates, and uses a comparison to only optimize partitions with data from the year 2022 or newer:

ALTER TABLE test_table EXECUTE optimize
WHERE CAST(timestamp_tz AS DATE) > DATE '2021-12-31'

ALTER TABLE RENAME TO

The connector only supports the ALTER TABLE RENAME TO statement when met with one of the following conditions:

• The table type is external.

• The table is backed by a metastore that does not perform object storage operations, for example, AWS Glue or Thrift.

Table properties

The following table properties are available for use:

Delta Lake table properties

Property name	Description
location	File system location URI for the table.
partitioned_by	Set partition columns.
checkpoint_interval	Set the checkpoint interval in number of table writes.
change_data_feed_enabled	Enables storing change data feed entries.
column_mapping_mode	Column mapping mode. Possible values are: ID NAME NONE Defaults to NONE.

The following example uses all available table properties:

CREATE TABLE example.default.example_partitioned_table
WITH (
  location = 's3://my-bucket/a/path',
  partitioned_by = ARRAY['regionkey'],
  checkpoint_interval = 5,
  change_data_feed_enabled = false,
  column_mapping_mode = 'name'
)
AS SELECT name, comment, regionkey FROM tpch.tiny.nation;

Metadata tables

The connector exposes several metadata tables for each Delta Lake table. These metadata tables contain information about the internal structure of the Delta Lake table. You can query each metadata table by appending the metadata table name to the table name:

SELECT * FROM "test_table$history"

$history table

The $history table provides a log of the metadata changes performed on the Delta Lake table.

You can retrieve the changelog of the Delta Lake table test_table by using the following query:

SELECT * FROM "test_table$history"

 version |               timestamp               | user_id | user_name |  operation   |         operation_parameters          |                 cluster_id      | read_version |  isolation_level  | is_blind_append
---------+---------------------------------------+---------+-----------+--------------+---------------------------------------+---------------------------------+--------------+-------------------+----------------
       2 | 2023-01-19 07:40:54.684 Europe/Vienna | trino   | trino     | WRITE        | {queryId=20230119_064054_00008_4vq5t} | trino-406-trino-coordinator     |            2 | WriteSerializable | true
       1 | 2023-01-19 07:40:41.373 Europe/Vienna | trino   | trino     | ADD COLUMNS  | {queryId=20230119_064041_00007_4vq5t} | trino-406-trino-coordinator     |            0 | WriteSerializable | true
       0 | 2023-01-19 07:40:10.497 Europe/Vienna | trino   | trino     | CREATE TABLE | {queryId=20230119_064010_00005_4vq5t} | trino-406-trino-coordinator     |            0 | WriteSerializable | true

The output of the query has the following history columns:

History columns

Name	Type	Description
version	BIGINT	The version of the table corresponding to the operation
timestamp	TIMESTAMP(3) WITH TIME ZONE	The time when the table version became active
user_id	VARCHAR	The identifier for the user which performed the operation
user_name	VARCHAR	The username for the user which performed the operation
operation	VARCHAR	The name of the operation performed on the table
operation_parameters	map(VARCHAR, VARCHAR)	Parameters of the operation
cluster_id	VARCHAR	The ID of the cluster which ran the operation
read_version	BIGINT	The version of the table which was read in order to perform the operation
isolation_level	VARCHAR	The level of isolation used to perform the operation
is_blind_append	BOOLEAN	Whether or not the operation appended data

$properties table

The $properties table provides access to Delta Lake table configuration, table features and table properties. The table rows are key/value pairs.

You can retrieve the properties of the Delta table test_table by using the following query:

SELECT * FROM "test_table$properties"

 key                        | value           |
----------------------------+-----------------+
delta.minReaderVersion      | 1               |
delta.minWriterVersion      | 4               |
delta.columnMapping.mode    | name            |
delta.feature.columnMapping | supported       |

Metadata columns

In addition to the defined columns, the Delta Lake connector automatically exposes metadata in a number of hidden columns in each table. You can use these columns in your SQL statements like any other column, e.g., they can be selected directly or used in conditional statements.

• $path

  Full file system path name of the file for this row.

• $file_modified_time

  Date and time of the last modification of the file for this row.

• $file_size

  Size of the file for this row.

Fault-tolerant execution support

The connector supports Fault-tolerant execution of query processing. Read and write operations are both supported with any retry policy.

Table functions

The connector provides the following table functions:

table_changes

Allows reading Change Data Feed (CDF) entries to expose row-level changes between two versions of a Delta Lake table. When the change_data_feed_enabled table property is set to true on a specific Delta Lake table, the connector records change events for all data changes on the table. This is how these changes can be read:

SELECT
  *
FROM
  TABLE(
    system.table_changes(
      schema_name => 'test_schema',
      table_name => 'tableName',
      since_version => 0
    )
  );

schema_name - type VARCHAR, required, name of the schema for which the function is called

table_name - type VARCHAR, required, name of the table for which the function is called

since_version - type BIGINT, optional, version from which changes are shown, exclusive

In addition to returning the columns present in the table, the function returns the following values for each change event:

• _change_type

  Gives the type of change that occurred. Possible values are insert, delete, update_preimage and update_postimage.

• _commit_version

  Shows the table version for which the change occurred.

• _commit_timestamp

  Represents the timestamp for the commit in which the specified change happened.

This is how it would be normally used:

Create table:

CREATE TABLE test_schema.pages (page_url VARCHAR, domain VARCHAR, views INTEGER)
    WITH (change_data_feed_enabled = true);

Insert data:

INSERT INTO test_schema.pages
    VALUES
        ('url1', 'domain1', 1),
        ('url2', 'domain2', 2),
        ('url3', 'domain1', 3);
INSERT INTO test_schema.pages
    VALUES
        ('url4', 'domain1', 400),
        ('url5', 'domain2', 500),
        ('url6', 'domain3', 2);

Update data:

UPDATE test_schema.pages
    SET domain = 'domain4'
    WHERE views = 2;

Select changes:

SELECT
  *
FROM
  TABLE(
    system.table_changes(
      schema_name => 'test_schema',
      table_name => 'pages',
      since_version => 1
    )
  )
ORDER BY _commit_version ASC;

The preceding sequence of SQL statements returns the following result:

page_url    |     domain     |    views    |    _change_type     |    _commit_version    |    _commit_timestamp
url4        |     domain1    |    400      |    insert           |     2                 |    2023-03-10T21:22:23.000+0000
url5        |     domain2    |    500      |    insert           |     2                 |    2023-03-10T21:22:23.000+0000
url6        |     domain3    |    2        |    insert           |     2                 |    2023-03-10T21:22:23.000+0000
url2        |     domain2    |    2        |    update_preimage  |     3                 |    2023-03-10T22:23:24.000+0000
url2        |     domain4    |    2        |    update_postimage |     3                 |    2023-03-10T22:23:24.000+0000
url6        |     domain3    |    2        |    update_preimage  |     3                 |    2023-03-10T22:23:24.000+0000
url6        |     domain4    |    2        |    update_postimage |     3                 |    2023-03-10T22:23:24.000+0000

The output shows what changes happen in which version. For example in version 3 two rows were modified, first one changed from ('url2', 'domain2', 2) into ('url2', 'domain4', 2) and the second from ('url6', 'domain2', 2) into ('url6', 'domain4', 2).

If since_version is not provided the function produces change events starting from when the table was created.

SELECT
  *
FROM
  TABLE(
    system.table_changes(
      schema_name => 'test_schema',
      table_name => 'pages'
    )
  )
ORDER BY _commit_version ASC;

The preceding SQL statement returns the following result:

page_url    |     domain     |    views    |    _change_type     |    _commit_version    |    _commit_timestamp
url1        |     domain1    |    1        |    insert           |     1                 |    2023-03-10T20:21:22.000+0000
url2        |     domain2    |    2        |    insert           |     1                 |    2023-03-10T20:21:22.000+0000
url3        |     domain1    |    3        |    insert           |     1                 |    2023-03-10T20:21:22.000+0000
url4        |     domain1    |    400      |    insert           |     2                 |    2023-03-10T21:22:23.000+0000
url5        |     domain2    |    500      |    insert           |     2                 |    2023-03-10T21:22:23.000+0000
url6        |     domain3    |    2        |    insert           |     2                 |    2023-03-10T21:22:23.000+0000
url2        |     domain2    |    2        |    update_preimage  |     3                 |    2023-03-10T22:23:24.000+0000
url2        |     domain4    |    2        |    update_postimage |     3                 |    2023-03-10T22:23:24.000+0000
url6        |     domain3    |    2        |    update_preimage  |     3                 |    2023-03-10T22:23:24.000+0000
url6        |     domain4    |    2        |    update_postimage |     3                 |    2023-03-10T22:23:24.000+0000

You can see changes that occurred at version 1 as three inserts. They are not visible in the previous statement when since_version value was set to 1.

Performance

The connector includes a number of performance improvements detailed in the following sections:

• Support for write partitioning.

Table statistics

Use ANALYZE statements in Trino to populate data size and number of distinct values (NDV) extended table statistics in Delta Lake. The minimum value, maximum value, value count, and null value count statistics are computed on the fly out of the transaction log of the Delta Lake table. The cost-based optimizer then uses these statistics to improve query performance.

Extended statistics enable a broader set of optimizations, including join reordering. The controlling catalog property delta.table-statistics-enabled is enabled by default. The equivalent catalog session property is statistics_enabled.

Each ANALYZE statement updates the table statistics incrementally, so only the data changed since the last ANALYZE is counted. The table statistics are not automatically updated by write operations such as INSERT, UPDATE, and DELETE. You must manually run ANALYZE again to update the table statistics.

To collect statistics for a table, execute the following statement:

ANALYZE table_schema.table_name;

To recalculate from scratch the statistics for the table use additional parameter mode:

ANALYZE table_schema.table_name WITH(mode = ‘full_refresh’);

There are two modes available full_refresh and incremental. The procedure use incremental by default.

To gain the most benefit from cost-based optimizations, run periodic ANALYZE statements on every large table that is frequently queried.

Fine-tuning

The files_modified_after property is useful if you want to run the ANALYZE statement on a table that was previously analyzed. You can use it to limit the amount of data used to generate the table statistics:

ANALYZE example_table WITH(files_modified_after = TIMESTAMP '2021-08-23
16:43:01.321 Z')

As a result, only files newer than the specified time stamp are used in the analysis.

You can also specify a set or subset of columns to analyze using the columns property:

ANALYZE example_table WITH(columns = ARRAY['nationkey', 'regionkey'])

To run ANALYZE with columns more than once, the next ANALYZE must run on the same set or a subset of the original columns used.

To broaden the set of columns, drop the statistics and reanalyze the table.

Disable and drop extended statistics

You can disable extended statistics with the catalog configuration property delta.extended-statistics.enabled set to false. Alternatively, you can disable it for a session, with the catalog session property extended_statistics_enabled set to false.

If a table is changed with many delete and update operation, calling ANALYZE does not result in accurate statistics. To correct the statistics, you have to drop the extended statistics and analyze the table again.

Use the system.drop_extended_stats procedure in the catalog to drop the extended statistics for a specified table in a specified schema:

CALL example.system.drop_extended_stats('example_schema', 'example_table')

Memory usage

The Delta Lake connector is memory intensive and the amount of required memory grows with the size of Delta Lake transaction logs of any accessed tables. It is important to take that into account when provisioning the coordinator.

You must decrease memory usage by keeping the number of active data files in the table low by regularly running OPTIMIZE and VACUUM in Delta Lake.

Memory monitoring

When using the Delta Lake connector, you must monitor memory usage on the coordinator. Specifically, monitor JVM heap utilization using standard tools as part of routine operation of the cluster.

A good proxy for memory usage is the cache utilization of Delta Lake caches. It is exposed by the connector with the plugin.deltalake.transactionlog:name=<catalog-name>,type=transactionlogaccess JMX bean.

You can access it with any standard monitoring software with JMX support, or use the JMX connector with the following query:

SELECT * FROM jmx.current."*.plugin.deltalake.transactionlog:name=<catalog-name>,type=transactionlogaccess"

Following is an example result:

datafilemetadatacachestats.hitrate      | 0.97
datafilemetadatacachestats.missrate     | 0.03
datafilemetadatacachestats.requestcount | 3232
metadatacachestats.hitrate              | 0.98
metadatacachestats.missrate             | 0.02
metadatacachestats.requestcount         | 6783
node                                    | trino-master
object_name                             | io.trino.plugin.deltalake.transactionlog:type=TransactionLogAccess,name=delta

In a healthy system, both datafilemetadatacachestats.hitrate and metadatacachestats.hitrate are close to 1.0.

Table redirection

Trino offers the possibility to transparently redirect operations on an existing table to the appropriate catalog based on the format of the table and catalog configuration.

In the context of connectors which depend on a metastore service (for example, Hive connector, Iceberg connector and Delta Lake connector), the metastore (Hive metastore service, AWS Glue Data Catalog) can be used to accustom tables with different table formats. Therefore, a metastore database can hold a variety of tables with different table formats.

As a concrete example, let’s use the following simple scenario which makes use of table redirection:

USE example.example_schema;

EXPLAIN SELECT * FROM example_table;

                               Query Plan
-------------------------------------------------------------------------
Fragment 0 [SOURCE]
     ...
     Output[columnNames = [...]]
     │   ...
     └─ TableScan[table = another_catalog:example_schema:example_table]
            ...

The output of the EXPLAIN statement points out the actual catalog which is handling the SELECT query over the table example_table.

The table redirection functionality works also when using fully qualified names for the tables:

EXPLAIN SELECT * FROM example.example_schema.example_table;

                               Query Plan
-------------------------------------------------------------------------
Fragment 0 [SOURCE]
     ...
     Output[columnNames = [...]]
     │   ...
     └─ TableScan[table = another_catalog:example_schema:example_table]
            ...

Trino offers table redirection support for the following operations:

• Table read operations

  • SELECT

  • DESCRIBE

  • SHOW STATS

  • SHOW CREATE TABLE

• Table write operations

  • INSERT

  • UPDATE

  • MERGE

  • DELETE

• Table management operations

  • ALTER TABLE

  • DROP TABLE

  • COMMENT

Trino does not offer view redirection support.

The connector supports redirection from Delta Lake tables to Hive tables with the delta.hive-catalog-name catalog configuration property.

Performance tuning configuration properties

The following table describes performance tuning catalog properties specific to the Delta Lake connector.

Warning

Performance tuning configuration properties are considered expert-level features. Altering these properties from their default values is likely to cause instability and performance degradation. It is strongly suggested that you use them only to address non-trivial performance issues, and that you keep a backup of the original values if you change them.

Delta Lake performance tuning configuration properties

Property name	Description	Default
delta.domain-compaction-threshold	Minimum size of query predicates above which Trino compacts the predicates. Pushing a large list of predicates down to the data source can compromise performance. For optimization in that situation, Trino can compact the large predicates. If necessary, adjust the threshold to ensure a balance between performance and predicate pushdown.	1000
delta.max-outstanding-splits	The target number of buffered splits for each table scan in a query, before the scheduler tries to pause.	1000
delta.max-splits-per-second	Sets the maximum number of splits used per second to access underlying storage. Reduce this number if your limit is routinely exceeded, based on your filesystem limits. This is set to the absolute maximum value, which results in Trino maximizing the parallelization of data access by default. Attempting to set it higher results in Trino not being able to start.	Integer.MAX_VALUE
delta.max-initial-splits	For each query, the coordinator assigns file sections to read first at the initial-split-size until the max-initial-splits is reached. Then it starts issuing reads of the max-split-size size.	200
delta.max-initial-split-size	Sets the initial data size for a single read section assigned to a worker until max-initial-splits have been processed. You can also use the corresponding catalog session property <catalog-name>.max_initial_split_size.	32MB
delta.max-split-size	Sets the largest data size for a single read section assigned to a worker after max-initial-splits have been processed. You can also use the corresponding catalog session property <catalog-name>.max_split_size.	64MB
delta.minimum-assigned-split-weight	A decimal value in the range (0, 1] used as a minimum for weights assigned to each split. A low value might improve performance on tables with small files. A higher value might improve performance for queries with highly skewed aggregations or joins.	0.05
delta.projection-pushdown-enabled	Read only projected fields from row columns while performing SELECT queries	true
delta.query-partition-filter-required	Set to true to force a query to use a partition filter. You can use the query_partition_filter_required catalog session property for temporary, catalog specific use.	false

File system cache

The connector supports configuring and using file system caching.